webOS 3.2+
ℹ️If LG Remote is locked, hold the settings button(⚙️) for approximately 8 seconds.
Go to EZ Setting and then SI Server Setting, choose SI Server Setting in next step.
Use following Configuration:
SI Server IP (not in use)
Port Number (not in use)
Secure Connection (not in use)
Fully Qualified Domain Name: On
Application Launch Mode: Local
Application Type: IPK
Auto Set: Off
Local Application Upgrade: REMOTE
🎉Confirm and reboot the screen, wait for the application to start.
webOS 3.0
On the welcome screen choose "Go to Settings" and make sure date, time and timezone are set correctly. Close the settings menu by pressing back/escape.
Press and hold the settings button until an empty toast message appears in the top right corner of the screen.
Now press 8, 0, 8, 0 then OK. This will open the SI Server Setting menu.
Use following configuration:
SI Server IP (not in use)
Port Number (not in use)
Secure Connection (not in use)
Fully Qualified Domain Name: On
URL: https://dms.visualart.se/webos/sp3/vaplayer.ipk
Application Launch Mode: Local
Application Type: IPK
Auto Set: Off
Local Application Upgrade: REMOTE
Confirm and reboot the screen, wait for the application to start.
As the installation has finished, the screen needs to be activated in the CMS either by secret given on the screen or it's MAC-address depending on CMS solution.
After activation, it can take up to 15 minutes until all settings and content has been downloaded.
