During Initial Setup
Tizen version 2.4, 3.0, 4.0, 5.0, 6.5
ℹ️Make sure the screen has power and is connected to the Internet. Wireless Connection can be configured at step 5.
Set Installation type to Basic Setup.
Set Display Orientation to Landscape.
Set Auto Power Off to OFF. (Does not exist on the US market)
Wired Connection should now be established and confirmed.
Choose URL Launcher.
Type in given URL (case sensitive), such as https://dms.visualart.se/tizen/sp3, the URL may differ depending on CMS solution.
Skip ‘Connect to RM Server’.
Set the correct Date & Time.
Initial setup is now complete, press Enter.
Press F5 on the keyboard or Home on the remote control, and press URL Launcher / Custom application.
🎉Screen will now download and install the VAPlayer application.
As the installation has finished, the screen needs to be activated in the CMS either by secret given on the screen or it's MAC-address depending on CMS solution.
After activation, it can take up to 15 minutes until all settings and content has been downloaded.
Tizen version 7.0, 8.0
Connect power and a network cable. Power up the screen. Choose “Hi or Hello”
Set up Network - For wired network the screen will check connection immediately. For wireless you need to select your Wi-Fi network and enter the password when prompted.
Smart Signage Privacy Notice - Accept the Privacy Notice by pressing "OK"
Installation Type - Select "Manual Setup"
Display Orientation - Select "Landscape" (Even for Portrait mounted screens we select "Landscape" in this step)
Player Selection - Select “Custom App”
Enter the URL - https://dms.visualart.se/tizen/sp3
Connect to RM Server - Press "Skip"
Auto Power Off - Press "Off"
Set Current Time - Set the current time & date then press "Next" (Make sure the time/date is not in the future as certificate errors might happen)
Set PIN - Set pin to "000000" and press "Next"
Now you will enter the Tizen OS, press “Custom App" to start our player.
🎉It will download, then install. This will normally only take a minute or two. When you see the red background the Installation is Done.
After initial setup:
Make sure the screen has power and is connected to the Internet.
Press Windows button on the keyboard or Menu on the Samsung Remote, then go to System and make sure Play via is set to URL Launcher / Custom application.
Press ESC or Exit until the menu is closed. Then press F5 on the keyboard or Home on the remote control.
Go to URL Launcher / Custom application settings and press Enter.
Go to Install web application and type in given URL (case sensitive), such as https://dms.visualart.se/tizen/sp3, the URL differs depending on CMS solution.
Screen will now download and install the VAPlayer application.
As the installation has finished, the screen needs to be activated in the CMS either by secret given on the screen or it's MAC-address depending on CMS solution.
After activation, it can take up to 15 minutes until all settings and content has been downloaded.
Samsung SSSP2 and SSSP3
Press Home on remote or F5 on keyboard
Select "Url launcher Settings"
Enter: https://dms.visualart.se/soc/sp3, press OK
Launch player
